EASYPURE

The benefits

Recycled = saved

Reduces the cost of reprocessing used fluid, reduces the purchase of new fluid, increases the life of the fluid used.

Optimal properties

SIEBEC filtration ensures the elimination of particles and lubricating oils, while avoiding bacterial development.

Better for the environment

On-site reprocessing eliminates trucking and reduces consumption of new fluid. Good for your carbon footprint!

Great compatibility

Handles emulsions, micro-emulsions, synthetic and whole oils, chip juices…

Applications

• Recycling of cutting fluids
• Treatment: tribofinishing/vibro-abrasion water, washing machine rinsing water, penetrant testing effluents, degreasing baths, etc.

Operation

• Automatic and/or manual operation through the touchscreen interface.
• Control of start and stop of operation or synchronization with the start of the plant.
• Alarm settings (pH, temperature, filter clogging, level detection).

1. Used fluid storage

The chip juices and used cutting fluids are stored in the 1000 l IBC. The fluid is then automatically transferred to the station in batches of 500 l.

2. Decanting

The fluid is transferred to the dephasing tank. The lubricating oils are collected in the module (A) and the sludge and chips are transferred to a BigBag for disposal.

3. Filtration & de-oiling

Once sludge, chips and supernatant oils have been removed, the fluid receives a finishing treatment to refine its filtration and eliminate fine particles and traces of lubricating oil.

4. UV treatment

The regenerated fluid is stored in the final IBC where it passes through the NANOREACTOR™ for continuous UV treatment to prevent bacterial growth.

5. Regenerated Fluid

The fully regenerated fluid is ready to be transferred to the machine tool’s lubricant tank for a new life.

6. Finishing treatment (optional)

The recycled fluid can be advantageously mixed with new fluid, and perfectly dosed using the EASYMIX™ automatic dosing station.