ACIDPURE™
Acid bath recycling
Acid regeneration station for the anodizing process. The ACIDPURE™ controls the balance and aluminum concentration of the anodizing baths completely autonomously to ensure consistent treatment quality.
Up to 94% of the sulfuric acid is recovered!
Why ACIDPURE™?
Traditionally, control of the aluminum concentration of an anodizing bath is done in a rough manner by removing a portion of the bath and replacing it with an equivalent volume of demineralized water and sulfuric acid to keep a constant concentration (180 to 240 g/l).
This results in significant costs associated with the loss of sulfuric acid and the treatment of effluent with high acid concentrations.
The ACIDPURE™ allows the aluminum concentration of the bath to be controlled and adjusted completely independently. The use of the ACIDPURE™ reduces not only the amount of sulfuric acid discharged but also the acid concentration of the effluent by 70%, making it less expensive to treat. The combination of the two results in a significant financial gain.
How does the ACIDPURE™ work?
The ACIDPURE™ uses an ion exchange resin to separate dissolved aluminum from sulfuric acid. The aluminum is then removed to a treatment plant while the sulfuric acid is returned to the anodizing bath.
A sustainable and profitable investment
- Sulfuric acid consumption reduced by more than half
- Elimination of a significant portion of maintenance costs
- Reduced environmental impact by recycling the acid
The assurance of quality parts
- Optimal aluminum concentration
- Get consistent quality
Increased productivity
- No interruption of the production line
- Autonomous machine
- Reduced maintenance frequency
Specifications
- Width (mm)
- 2120
- Length (mm)
- 961
- Height (mm)
- 1568
- Applications
- Acid recycling